Justin is an sincere and high quality painter that I really have really helpful to purchasers on a variety of properties I have sold. He really blew me away on one home in particular lately in Point Loma.
I even have patched several holes in drywall with no studs. The first thing you can do is take a shim and put it within the hole. While holding it attempt to get a screw via the present drywall on both sides to carry the shim in place. I then cut a piece of recent drywall and screw that into the shim. Tape, and use drywall compound to fill it in and mix. After it dries sand and apply more drywall compound if wanted.
Drywall Repair Companies
Continue the method till all the sides have been removed. Take your utility knife and scrape alongside the edges of the hole to remove any pieces that could be sticking up. When the spackle is dry, sand it down or use a stiff putty knife to scrape it flush with the wall or ceiling.
This effect is achieved by applying several layers of drywall compound and then knocking some layers off with a putty knife. …